D-type Remote control duplicator
The chipset compatibility:
2260(All the manufacturers)
2262(All the manufacturers)
PT2264,5326(All the manufacturers)
SC5262,HT600,HT680,HT6207,HT6010,HT6012,HT6014,SMC918 Series,527(All the manufacturers)
1527(All the manufacturers)
2240(All the manufacturers)
Parts of singlechip......
Here is the way of copy
Step:1:Clear the history code from duplicator
1:Press button 1 and 2 continuously until LED flash 3 times
2.Release button 2 (Keep pressing button 1),and press button 2 Slowly for 3 times,LED flash
3.Release button “1”,finish code clearance.
Step 2,Copy code from original transmitter
1. Put duplicator aside of original transmitter,as close as possible.
2. Press and hold button 1 of original transmitter,then press and hold button 2 of duplicator until you see the duplicator’s LED flash
3. 3.Release both buttons,finish code copy,copy other button in same way.
Step 3, Resume
If you erase the code stored on the copied remote controller incaution, you can resume it by pressing and holding both of the "3" and "4" button on the remote controllers at the same time, after 10 seconds, the LED flash 2 times and turn off which indicated the code of the copy remote controller is resumed.