ダイハツOBD鍵マッチング計器

大发4D芯片钥匙匹配方法
 The instruction of Daihatsu 4D Keymaker OBD

第一  将OBD工具插入车上OBD串口
First , connect the programmer to the OBD port of the car.

第二  将原车可发动的锁匙插入点火锁并转到ON的位置等到防盗灯熄灭将锁匙取出
Secondly, Insert the original key into the ignition lock,  turn to “ ON” position ,then remove this key after the theftproof light off.

第三  将新锁匙插入点火锁转到ON位置等待防盗灯熄灭该锁匙即匹配完成，然后将OBD工具取下即可
Third, insert the new key into the ignition lock, then turn to “ ON” position, the new key will successful when the theftproof light off.
Now can remote the programmer from the OBD port.

注：锁匙都遗失了暂时不可以做！
Remark:  unavailable when all key losed
 available for DAIHATSU 4D transponder keyAnother way :

1. close all door and plug OBD maker into the OBD the sokect of the car.
2. Inster the existing key into the ignition lock then turn into ON position and back to OFF position rapidly ,then remove the key .
3. inster a new key into the ignition lock then turn it to ON position and back to OFF poisiton rapidly then remove the key .
4. the security light on the dashboard should to ON ,then need to wait the light for going off or open the driver’s door to close the procedure.